How to maintain the mold?

How to maintain the mold?

The maintenance of the mold is very important. Even if you purchase a new mold, you will need to inspect and maintain the mold after a long journey.

Before maintaining the mold, you also need to be fully familiar with the structure of the mold and ensure that the person who disassembles and assembles the mold has sufficient mold technology and experience. If you are not familiar with the mold structure, it is likely to cause damage to the mold during the assembly and disassembly process. For example, if the part is installed in the wrong position, the part is missed, etc., it may cause the mold to be damaged.

If you feel that you have any questions about mold disassembly, you can contact our technical engineers at any time.

Below is the recommended four different levels maintenance:

1.  Preventative: Every day and every time the mold is pulled from production or put back into production.

2.  Inspection: Every 20,000 cycles (or every 10 days of production)

3.  Maintenance: Every 50,000 cycles (or every 5 production runs)

4.  Major Maintenance: Every 200,000 cycles (or half the anticipated lifetime volume)

Contact us for detail of maintenance.